Contact admin@exoticponymods.com or call +613 9846 2338 for support. Click here to follow us on YouTube, Instragram and Facebook.
2015 2016 2017 2018 2019 2020 2021 2022 2023 AUS EURO UK Mustang Tail Light Sequencers Triple-Mode Ultimate Version

2015 2016 2017 2018 2019 2020 2021 2022 2023 AUS EURO UK Mustang Tail Light Sequencers Triple-Mode Ultimate Version

ExoticPonyMods

$215.00 $195.00 Sale

In Stock

Below is a global heat map of the V3.3 sequencers (last 5000 orders). Our sequencers have been sold to more than 40 countries (regions) in all 5 continents.

Quick Guide:

New White Camo Case Available 

Limited Edition BULLITT Highland Green Case

Introduction:

To transform your Non-USDM Mustang tail lights to what they were supposed to look like by design - the iconic tri-bar sequential indicators. These simple plug and play sequencers will do the trick. Courtesy of the diligent engineers at EPM. These innovative and patented sequencers will fit all international-spec 2015-2020 S550 Mustangs with those clear white tail lights. This kit comes with a PAIR of sequencers, that takes less than 5 mins to install or uninstall.

The V1 and V2 sequencers were very popular and successful products. We have in turn received quite a lot of feedback on different needs and road regulations. So here is the V3, the ultimate sequencer that allows the driver to switch between the modes of the tail light at will.

We are very proud to present this product as it is developed, engineered and built ground up by EPM engineers.

Main Features:

  • Convert single bar amber indicator to sequential. Adding animation to the dull blinker.
  • Plug & Play, Installation takes less then 5 mins without tools
  • Ability to switch between 3 modes (including factory stock mode) in the driver's seat
  • Combining V1 and V2 logics into one more refined product
  • Patent Pending

*Compatible with adding sequencing to RED USDM tail lights migrated onto EURO/UK/AUS spec Mustangs
*Compatible with all 2015-2021 non USDM Mustangs regardless spec and trim level

 

2015 vs 2018+ (with Sequencers):

Review:

    Signal Logic:

    • Indicating - Sequential flashing 2xRED then plus 1xAmber, completing the gradient red to amber color.
    • Hazard light - Continuous double sequential blink on both sides
    • Locking and Unlocking the vehicle - Double sequential blink on both sides once and twice respectively
    • Break while indicating - Brake and Indicator will have priority over one another depending on the Mode selected

    3 Modes to Select as Desired:

    • Mode A(mber): Sequential Indicator have priority over brake
    • Mode B(rake):  Brake has priority over sequential indicator
    • Mode S(tock):  Factory stock indicating and brake logic
    • Default Mode is B
    • Only need to be changed once for the life time or as desired.
    • Patented
    • Update* latest MY2020-21 Mustangs mode change not directly available when installed. Modes can be preset however. Please contact us if you need Mode A by default.

    To Switch Modes:

    1. Switch ACC On
    2. Light switch to OFF "0" position
    3. Brake and keep brake pressed
    4. Turn light switch in quick succession to ON , OFF, ON, OFF, ON, OFF, ON positions
    5. Flip Hazard light to ON for more than 1 second
    6. Flip Hazard light to OFF
    7. Release Brake
    8. Check the mode switch is successful

    To Sync Modes (if sequencers are in different modes):

    1. Switch ACC On
    2. Light switch to OFF "0" position
    3. Brake and keep brake pressed
    4. Turn light switch in quick succession to ON , OFF, ON, OFF, ON, OFF, ON positions
    5. Flip the indicator light (on the side you wanted to change mode) to ON for more than 1 second
    6. Flip Hazard light to OFF
    7. Release Brake
    8. Check the mode switch is successful

    How to Switch Mode

    How to Install (Same as the US version):

    Preview - a continuous video showing the sequencer cycle through 3 modes.

    USDM Tail Light Migration - Sequencer

    This is the application where you can fit the RED USDM taillights onto EURO/UK/AUS/ASIAN Mustangs

    This kit will come with an extra pair of EURO/UK/AUS spec male plugs to replace the factory USDM plugs. This is for mounting USDM tail lights onto Australian/EURO/UK non-USDM Mustangs. 

    Installation instruction is included.